0 BASKET
products in your basketto quote
Ooops no items were found.
Try something else.
Ok
Loading…
To basket
Quote Me
0
Brother

Brother HSe Heat Shrink Tube Tape Cassette 5.2mm x 1.5m Black on Yellow HSe611E

Category Label Tapes
BA82288 BA82288
BA82288 BA82288
BA82288 BA82288
BA82288 BA82288
BA82288 BA82288
Brother

Brother HSe Heat Shrink Tube Tape Cassette 5.2mm x 1.5m Black on Yellow HSe611E

Category Label Tapes
Manufacturer Brother
  • Heat shrink tube for labelling wires and cables
  • Shrinks when heated to allow easy cable identification
  • Recommended for use with cables between 0.8mm to 3.1mm
  • For use with Brother P-Touch labelmakers
  • Width: 5.2mm
  • Black text on yellow background

Document
The Brother 5.2mm black on yellow Hse-611E tape cassette has been designed specifically for the marking and identifying of cables, fibres and wires with an outside diameter of 0.8mm to 3.1mm. The non-adhesive tape is printed, the printed tube is opened up and passed over a cable, or terminating connector and heated with a heat gun, the tube shrinks down, gripping the cable tightly. No adhesive is needed, ensuring that even in warm environments the heat shrink tube will not unpeel from the cable. For use with Brother P-Touch labelmakers. Quick and easy to install. For crisp, sharp and easily readable labels. 1.5m length.

Buywise NHS Favourites

Brother

Brother HSe Heat Shrink Tube Tape Cassette 5.2mm x 1.5m Black on Yellow HSe611E

Category Label Tapes
BA82288 BA82288
BA82288 BA82288
BA82288 BA82288
BA82288 BA82288
BA82288 BA82288
Brother

Brother HSe Heat Shrink Tube Tape Cassette 5.2mm x 1.5m Black on Yellow HSe611E

Category Label Tapes
Manufacturer Brother
  • Heat shrink tube for labelling wires and cables
  • Shrinks when heated to allow easy cable identification
  • Recommended for use with cables between 0.8mm to 3.1mm
  • For use with Brother P-Touch labelmakers
  • Width: 5.2mm
  • Black text on yellow background

Document
The Brother 5.2mm black on yellow Hse-611E tape cassette has been designed specifically for the marking and identifying of cables, fibres and wires with an outside diameter of 0.8mm to 3.1mm. The non-adhesive tape is printed, the printed tube is opened up and passed over a cable, or terminating connector and heated with a heat gun, the tube shrinks down, gripping the cable tightly. No adhesive is needed, ensuring that even in warm environments the heat shrink tube will not unpeel from the cable. For use with Brother P-Touch labelmakers. Quick and easy to install. For crisp, sharp and easily readable labels. 1.5m length.

Buywise NHS Favourites

SEARCH ×